硅和锗纳米线的原子排布和电荷分布的密度泛函紧束缚方法研究

低维硅锗材料是制备纳米电子器件的重要候选材料，是研发高效率、低能耗和超高速新一代纳米电子器件的基础材料之一，有着潜在的应用价值。采用密度泛函紧束缚方法分别对厚度相同、宽度在0.272 nm~0.554 nm之间的硅纳米线和宽度在0.283 nm~0.567 nm之间的锗纳米线的原子排布和电荷分布进行了计算研究。硅、锗纳米线宽度的改变使原子排布，纳米线的原子间键长和键角发生明显改变。纳米线表层结构的改变对各层内的电荷分布产生重要影响。纳米线中各原子的电荷转移量与该原子在表层内的位置相关。纳米线的尺寸和表层内原子排列结构对体系的稳定性产生重要影响。     

高居里温度铁电单晶PIN-PT的机电性能

弛豫铁电单晶Pb(In_1/2Nb_1/2)O₃-PbTiO₃(PIN-PT)相较于常用的Pb(Mg_1/3Nb_2/3)O₃-PbTiO₃(PMN-PT)具有更高的居里温度,在高稳定性、高性能的传感器、换能器方面具有应用前景。本工作采用谐振法研究了[001]方向极化的0.66PIN-0.34PT铁电单晶的全矩阵机电性能参数。0.66PIN-0.34PT 单晶的三方-四方相变温度(T_RT)约为160 ℃,居里温度(T_C)约为260 ℃,室温压电系数d₃₃、d₃₁、d₁₅分别为1 340 pC/N、-780 pC/N、321 pC/N,介电常数ε^T₃₃、ε^S₃₃、ε^T₁₁、ε^S₁₁分别为2 700、905、2 210、1 927,机电耦合系数 k₃₃、k₃₁、k₁₅、k_t分别为 87%、58%、38%、61%。其纵向压电常数(d₃₃)和纵向机电耦合系数(k₃₃)小于 PMN-PT 单晶,但是横向压电性能(d₃₁)和剪切压电性能(d₁₅)都略高于PMN-PT单晶。另外,研究了机电耦合性能随温度的变化趋势,发现0.66PIN-0.34PT单晶在150 ℃以下有较好的温度稳定性。     

正交匹配追踪算法的迭代残差重建方法

正交匹配追踪(Orthogonal Matching Pursuit, OMP)算法是一种重要的压缩感知重构算法. OMP算法在每次迭代中选择与当前残差最相关的原子. 针对每次迭代需要重新计算残差的问题, 本文考虑偶数次迭代下残差未知的情况. 首先, 研究了奇数次迭代的残差与下一次迭代的残差之间的关系, 得到了一种偶数次迭代时选择原子的标准. 然后, 引入一种回溯机制来处理前面所得的迭代结果, 这种机制通过剔除其中多余的原子来实现精确重建. 据此, 提出了可减少计算残差的改进型正交匹配追踪算法.     

基于贝叶斯参数优化的无模型自适应硅单晶直径控制

直拉硅单晶的生长过程涉及多场多相耦合与复杂的物理化学变化,其中工艺参数的波动是导致晶体直径不均匀的重要原因,如何实现工艺参数的控制以获得理想的、均匀的晶体直径具有重要的研究意义。本文分析现有控制方法存在不稳定以及控制效果不佳的问题后,提出基于贝叶斯参数优化的无模型自适应控制模型来控制硅单晶生长过程中的晶体直径。首先以坩埚上升速度与加热器的功率作为控制输入参数,晶体直径作为输出,搭建无模型自适应控制模型,并分析算法的稳定性。其次将控制模型进行仿真实验,发现硅单晶直径控制模型中不同的超参数设定会影响控制过程的迭代次数以及控制效果。最后,利用贝叶斯优化超参数的取值范围,并进行最终的仿真实验,结果表明,经贝叶斯参数优化后的控制模型计算快、迭代次数少,输出的晶体直径稳定,同时将生长工艺参数控制在实际生产要求范围内。因此,基于贝叶斯参数优化的无模型自适应控制实现了硅单晶直径均匀稳定的有效控制,具有结合工程背景的实际应用前景。     

光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

基于电化学老化衰退模型的锂离子动力电池外特性

当前锂离子动力电池电化学模型存在模型复杂、建模难度大、计算效率低、老化评估效果差的问题,本文提出一种考虑电池衰退老化的机理模型(ADME).本文首先通过有限差分法对伪二维(P2D)电化学模型进行离散降阶处理,得到简化伪二维(SP2D)模型.在SP2D模型的基础上,基于阴阳两极发生的副反应导致的衰退老化现象,提出一种考虑电池衰退老化的机理模型.其次,使用多变量偏差补偿最小二乘法实现模型参数辨识.最后通过动力电池衰退老化性能循环实验,对比分析了恒流、脉冲工况下SP2D模型和ADME模型的终端电压输出.结果表明:ADME模型较为简单、计算效率和估算精度高,可以有效评估电池容量老化衰退,得到理想的锂离子动力电池外特性曲线.     

Shotgun reconstruction in the hypercube

Mossel and Ross raised the question of when a random coloring of a graph can be reconstructed from local information, namely, the colorings (with multiplicity) of balls of given radius. In this article, we are concerned with random 2-colorings of the vertices of the -dimensional hypercube, or equivalently random Boolean functions. In the worst case, balls of diameter are required to reconstruct. However, the situation for random colorings is dramatically different: we show that almost every 2-coloring can be reconstructed from the multiset of colorings of balls of radius 2. Furthermore, we show that for , almost every -coloring can be reconstructed from the multiset of colorings of 1-balls.     

一种基于序贯估计的直达声区水面舰船 被动测距方法 *

该文利用基于射线的盲解卷积方法，从直达声区的水面舰船噪声中提取出船和锚系于海底的垂直接收阵之间的时域信道响应，并利用直达波在不同阵元相对于参考阵元的到达时间差，通过序贯方法，利用射线模型和声速剖面信息，对水面舰船距接收阵的距离进行了估计。通过处理海深约为580 m的2016年美国圣巴巴拉海峡的实验数据，对1.6~3.5 km直达声区范围内Anna Maersk商船与垂直阵之间的距离进行了估计，验证了测距方法的有效性，并将结果与系统测量值和几何方法的估计值进行了比较。由于该方法不需要对海底参数进行估计，所以在海底参数未知时要优于传统匹配场方法；在声速剖面存在跃层且海底为多层分布的复杂信道条件下，该方法仍能对距离进行有效估计，且与测量值的相对误差在6%以内，小于几何方法的估计误差，测距结果精度较高。     

The connected partition lattice of a graph and the reconstruction conjecture

Previously we showed that many invariants of a graph can be computed from its abstract induced subgraph poset, which is the isomorphism class of the induced subgraph poset, suitably weighted by subgraph counting numbers. In this paper, we study the abstract bond lattice of a graph, which is the isomorphism class of the lattice of distinct unlabelled connected partitions of a graph, suitably weighted by subgraph counting numbers. We show that these two abstract posets can be constructed from each other except in a few trivial cases. The constructions rely on certain generalisations of a lemma of Kocay in graph reconstruction theory to abstract induced subgraph posets. As a corollary, trees are reconstructible from their abstract bond lattice. We show that the chromatic symmetric function and the symmetric Tutte polynomial of a graph can be computed from its abstract induced subgraph poset. Stanley has asked if every tree is determined up to isomorphism by its chromatic symmetric function. We prove a counting lemma, and indicate future directions for a study of Stanley's question.     

A framework to perform high-order deconvolution for finite-volume method on simplicial meshes

In this article, a new framework to design high-order approximations in the context of node-centered finite volumes on simplicial meshes is proposed. The major novelty of this method is that it relies on very simple and compact differential operators, which is a critical point to achieve good performances in the High-performance computing context. This method is based on deconvolution between nodal and volume-average values, which can be conducted to any order. The interest of the new method is illustrated through three different applications: mesh-to-mesh interpolation, levelset curvature computation, and numerical scheme for convection. Higher order can also be achieved within the present framework by introducing high-rank tensors. Although these tensors feature much symmetries, their manipulation can quickly become an overwhelming task. For this reason and without loss of generality, the present articles are limited to third-order expansion. This method, although tightly connected to the k-exact schemes theory, does not rely on successive corrections: the high-order property is obtained in a single operation, which makes them more attractive in terms of performances.